S60 Pneumatic grinder is mainly applicable to finishing or polishing the flat, the ARC and various surface of metal. It could grinder out the rust layer and paint layer if it is fitted with wire brush. Extended pneumatic grinder is widely used to regrind deep hole, casting riser, welded surface of the moulds and casting pieces. The biggest features of it are less noise and easy using.
|Max. dia. of grinding wheel||60 mm|
|Dia. of grinding wheel hole||20 mm|
|No load speed||15000-16000 r/m|
|Main shaft power||0.36 kw|
|Air consumption||≤21 L/S|
|Air pressure||0.50-0.63 Mpa|
|Inside dia. of hose connector||8 mm|